Pumps for the Paper Industry View other industries
Positive Displacement pumps are to be found in numerous processes, including the Coating Kitchen, at the Size Press and on the Coating Section; all providing gentle handling of shear sensitive media and long trouble free service.
-
SSP Series DD Double Disc Pumps
SSP Dual Disc pumps are designed for use within effluent and industrial treatment processes where arduous duties in harsh conditions exist.
-
SSP Series D Cast Iron Rotary Lobe Pumps
The Series D Rotary Lobe Pump is a cost effective and highly efficient pump for industrial applications and sludge transfer.
-
SSP Series S Rotary Lobe Pumps
SSP Series S stainles steel pumps operate at the heart of the process indutsries worldwide. Series S pumps fulfil a wide range of application requirements throughout Chemical, Food, Pharmaceutical and other related industries.
-
SSP Series X Rotary Lobe Pumps
SSP Series X stainless steel rotary lobe pumps provide the ultimate in clean pumping. Series X pumps complement the SSP Series S pumps, which are used throughout industrial and clean processes worldwide
-
SSP Series L Rotary Lobe Pumps
The SSP Series L range of rotary lobe pumps combines cost-effective simplicity with SSP quality and reliability.
-
SSP Series A & G Rotary Lobe Pumps
SSP Series A and Series G rotary lobe pumps are designed for high volume fluid transfer duties and are amongst the world’s largest pumps of this type. Both series are engineered to order.
-
Calpeda Single and Twin Impeller Pumps
Single and Twin Impeller Centrifugal pumps for clean water duties to 60m3/hr
-
Calpeda Multi-stage Pumps
Horizontal multi stage close coupled pumps in chrome-nickel stainless steel for non aggressive liquids with heads up to 70m.
-
Calpeda Pressure Boosting and Fire Fighting Sets
Pressure boosting and fire sets with advanced control technology. Fixed and variable speed control options with microprocessing control for accurate operation at optimised efficiency.
-
Ebara General Industrial Pumps
The most economical choices are always available on a vast range of Industrial Pumps from manufacturers such as Calpeda, Ebara, Lowara, Grundfos and Pedrollo.
-
Roto Series WM Progressing Cavity Pumps
Roto WM pumps are heavy duty pumps with wide throat inlets for applications involving solids to 15% such as Belt Filter Press.
-
Roto Series KM Progressing Cavity Pumps
KM Range pumps from Roto are widethroat pumps supplied with Bridge breakers to handle heavy liquids with up to 40% solids.
-
Crane Series IP Industrial Peristaltic Pumps
The patented ‘Hose-in-Hose’ vacuum system incorporated in the IP range design, enhances the inherent peristaltic pumping benefits offered by conventional peristaltic pump design.
-
Crane Series M300 Mobile Peristaltic Pumps
ELRO M300 series Peristaltic Pumps were designed for safe, quick and mobile applications in the most varied industrial operating conditions.
-
Crane Elro T300 Peristaltic Pumps
The Elro T300 mobile peristaltic pumps are designed for a very wide range of applications across all industries.
-
Faggiolati Submersible drainage pumps
A Range of robust cast iron submersible centrifugal pumps for arduous sewage and general drainage applications.
From Process such as coatings through pulp and into waste water process, Channel Pumps can supply shear sensitive solutions on the one hand as well as pumps that can handle large quantities of solids and waste on the other, to keep the paper industries fluid transfer processes flowing.
Media
- Alum
- Anti-foaming Agents
- Black Liquor
- Calcium Carbonate
- Carboxy Methyl Cellulose (CMC)
- China Clay Slurries
- Dyes
- Latex
- Rosin
- Starch
- Tall Oil
- TiO2
Application
- Chemical Dosing
- Coating Feed
- Coating Recovery
- Sizing
- Transfer
- Separation
-
Cost effective easy maintenance
Low running and maintenance costs and easy access to pumphead minimising downtime, results in a reduced lifecycle cost (LCC). -
Ability to pump abrasive media
Non-contacting pumphead design ensures that abrasive particles do not cause excessive wear. -
Easy re-start
Low breakout torque following machine stoppages.
-
Low shear pumping
Minimal damage to extremely shear sensitive media, such as latex and starch based coatings. -
Indefinite dry running capability
Avoiding pump components shedding into pumped media. -
Compact design
Occupies considerably less floor space than other pump technologies.