Pumps for the Waste Processing Industry View other industries

Reliability is a primary concern of the industry, particularly as pumps are frequently installed in remote locations and, as a result, need to operate unattended. Equally important is the ability to handle a range of waste products, including those that are abrasive, fatty, contain rags and large solids, without blocking and failing.

  • Penn Valley Disc Pumps

    Penn Valley Double Disc Pumps have developed the next generation of Disc Pumps for managing waste water and sludge transfer.

  • Borger Rotary Lobe Pumps

    Borger Pumps provide a cost effective and efficient solution to a wide range of applications in a number of industries including abrasive slurry and waste fluid process as well as many key transfer duties in the Water Industries.

  • Gorman Rupp T Series Pump

    Heavy Duty Gormann Rupp T series Pumps set the standard for industrial and municipal standard for self priming solids transfer.

  • DD Double Disc Pumps

    Dual Disc pumps are designed for use within effluent and industrial treatment processes where arduous duties in harsh conditions exist.

  • SSP Series SD Single Disc Pumps

    SSP Single Disc pumps are designed for use within effluent processes for pumping sludges and other waste media having entrained solids.

  • SSP Series D Cast Iron Rotary Lobe Pumps

    The Series D Rotary Lobe Pump is a cost effective and highly efficient pump for industrial applications and sludge transfer.

  • Calpeda Submersible Drainage and Sewage Pumps

    From fully stainless steel cellar drain pumps to high capacity submersible non clog sewage pumps and systems including macerator or chopper pumps.

  • Faggiolati Submersible drainage pumps

    A Range of robust cast iron submersible centrifugal pumps for arduous sewage and general drainage applications.

  • Calpeda Single and Twin Impeller Pumps

    Single and Twin Impeller Centrifugal pumps for clean water duties to 60m3/hr

  • Elro Series M300 Mobile Peristaltic Pumps

    ELRO M300 series Peristaltic Pumps were designed for safe, quick and mobile applications in the most varied industrial operating conditions.

  • Elro T300 Peristaltic Pumps

    The Elro T300 mobile peristaltic pumps are designed for a very wide range of applications across all industries.

  • Elro Series IP Industrial Peristaltic Pumps

    The patented ‘Hose-in-Hose’ vacuum system incorporated in the IP range design, enhances the inherent peristaltic pumping benefits offered by conventional peristaltic pump design.

  • DEPA Series P Plastic Air Operated Diaphragm Pumps

    Our range of non-metallic pumps are available either injection moulded or machined from solid, and are designed for problem-free pumping of highly corrosive and abrasive products in a wide range of applications.

  • DEPA Series M Metallic Air Operated Diaphragm Pumps

    Modular in design and technically developed for use in harsh industrial applications, the range includes over 20 products, all of which provide high resistance to abrasive and corrosive materials, low flow resistance, minimal downtimes and increased durability

  • Roto Series WM Progressing Cavity Pumps

    Roto WM pumps are heavy duty pumps with wide throat inlets for applications involving solids to 15% such as Belt Filter Press.

  • Roto Series RD Progressing Cavity Pumps

    Roto Progressive Cavity Pumps have been used for over 3 decades in waste water and industrial effluent treatment. The RD series offer a cost effective solution for small capacity applications

  • Roto Series RM Progressing Cavity Pumps

    The Medium to large Capacity RM series Roto Pump offers flows to 200m3/hr and pressures to 48bar, with solids handling of up to 7%.

  • Roto Series RL Progressing Cavity Pumps

    The Roto RL series pumps with extra large capacities to 340m3/hr have a longer pitch rotor and stator resulting in lower wear rates, smooth flow and better efficiencies.

  • Roto Series KM Progressing Cavity Pumps

    KM Range pumps from Roto are widethroat pumps supplied with Bridge breakers to handle heavy liquids with up to 40% solids.

  • Ebara Packaged Pumping Stations

    Packaged pumping stations for dirty water and sewer drainage can be selected and designed for most wastewater applications from small domestic applications to those servicing large housing developments.

Channel Pumps are renowned for their exoertise in solving some of the most difficult applications on today's waste treatment plants. Whether its disc pumps for pumping viscous sludges involving high quantities of grit or rag or high volume transfer using easy maintained Rotary lobe or Progressing cavity pumps Channel Pumps technical expertise can offer the ideal solution every time.

Media
  • Primary Sludge
  • Digested Sludge
  • Humus Sludge
  • Raw Sewage
  • Abattoir Waste
  • Poultry Waste
  • Other Industrial Waste
Application
  • Primary tank desludging
  • Secondary desludging
  • Humus tanks
  • Thickener feed
  • Digester Feed
  • Filterpress feed
  • Tanker loading
  • grit tanks
  • Cost effective easy maintenance
    Low running and maintenance costs and easy access to pumphead minimising downtime, results in a reduced lifecycle cost (LCC).

  • Compact design
    Occupies considerably less floor space than other pump technologies.

  • Low energy consumption
    Lower power requirements than other pump technologies.

  • Abrasion resistance
    Pumphead and rotors can be supplied with a tungsten carbide coating to increase wear resistance. Also pump casings can be supplied with hardened, replaceable wear plates that can be replaced in-situ with minimal pump dismantling.

Can’t find what you are looking for? View our full range.